Heatstrip 3200W Classic Radiant Outdoor Heater with Remote - THH3200AR

Heatstrip 3200W Classic Radiant Outdoor Heater

The Heatstrip Classic is an Australian designed and engineered range of premium quality, stylish and slimline electric radiant heaters ideal for protected outdoor and indoor heating applications. This includes your alfresco and outdoor dining area, patio, pergola, veranda, garage and shed, as well as cafés, restaurants, factories, showrooms and warehouses.

DIY installation is easy with multiple mounting options and with an unobtrusive design, these heaters provide efficient, gentle warmth and significant running cost savings compared to bottled gas heaters.

• Electric radiant outdoor heater
• 2 Models available THH2400AR (2400W) & THH3200AR (3200W).
• The new remote control heater has 1-3 temperature settings and 1-24 hour timer control.
• Slimline design and “all black” colour
• New compact and higher output design
• Corrosion-resistant for most environments
• Convenient DIY installation for the 2400W model. The 3200W model must be hardwired and installed by licensed professional 
• 2-year residential and 1-year commercial warranty.

General recommendations for HEATSTRIP® Classic with Remote:

• Ideal mounting height: 2.3m to 2.5m. Maximum is 2.7m in a fully protected/enclosed outdoor environment.
• Ideal mounting location: ceiling mounted, directly above area to be heated (eg. above a table)
• For a protected outdoor area, a minimum of 500W/m2 is required. For indoor spot heating, a minimum heating capacity of 400W/m2 is recommended.

The table below outlines the maximum coverage of each HEATSTRIP® Classic with Remote model based on 3 different scenarios with direct overhead mounting. For example, for an outdoor area that is protected from prevailing winds by walls, cafe blinds etc, Model THH2400AR will cover 4.8m2 and Model THH3200AR will cover 6.4m2. For angled wall mounting applications, the coverage is reduced by up to 40%.

The installation of HEATSTRIP® Classic is simple and easy with the standard mounting brackets supplied. For other locations, there are a range of mounting options available – (refer to diagrams). The HEATSTRIP® Classic can be mounted directly to the ceiling; angled downwards on a wall; fitted flush with the ceiling; suspended on chains or poles; attached to beams/poles/umbrella’s; mounted end-to-end, or 2 units together.