Heatstrip Elegance Outdoor Electric Heater with Remote Control - THE2400R

• Electric radiant outdoor heater
• 2 Models available THE2400R (2400W) & THE3200R (3200W)
• New control panel with low, high temperature settings and timer
• Slimline design and “off-white” colour
• New compact and higher output design
• Corrosion-resistant for most environments
• Convenient DIY installation for the 2400W model. The 3200W model must be hardwired
• 2 year residential and 1 year commercial warranty.

MOUNTING HEIGHT

• Minimum mounting height (including flush mount) 2.1m
• Ideal mounting height (including flush mount) 2.2m – 2.5m
• Maximum mounting height (including flush mount) 2.7

The mounting height of the electric heater can have a significant impact on performance. For mounting heights higher than the ideal range, we recommend the use of wires/chains or optional extension poles to reduce the height and ensure the heater is within the ideal range. Heater performance may be affected if outside this range.

The table outlines the maximum coverage of each HEATSTRIP® Elegance model based on 3 different scenarios with direct overhead mounting at minimum installation height. For example, for an outdoor area that is protected from pre- vailing winds by walls, café blinds etc, Model THE1800 will cover a maximum of 3.6m2 and Model THE2400 will cover a maximum of 4.8m2.

For the majority of outdoor applications, the most effective method is to spot heat a table or similar area. The diagrams provide an easy selection guide for the approximate model and quantity of heaters required to heat common residential table settings. Selections are based on HEATSTRIP® Elegance being mounted at 2.4m from the floor in an undercover fully enclosed outdoor area.

For angled wall mounting applications, the coverage is reduced by up to 40%.

The installation of HEATSTRIP® Elegance is simple and easy with the standard mounting brackets supplied. For other locations, there are a range of mounting options available – (refer to below diagrams). The HEATSTRIP® Elegance can be mounted directly to the ceiling; angled downwards on a wall; fitted flush with the ceiling; suspended on chains or poles; attached to beams/poles/umbrellas; mounted end-to-end, or 2 units together.

• Minimum mounting height (including flush mount) 2.1m
• Ideal mounting height (including flush mount) 2.2m – 2.5m
• Maximum mounting height (including flush mount) 2.7m/2.8m (indoors)

The mounting height of the electric heater can have a significant impact on performance. For mounting heights higher than the ideal range, we recommend the use of wires/chains or optional extension poles to reduce the height and ensure the heater is within the ideal range. Heater performance may be affected if outside this range.